Bathroom

Windowless bathroom: where a LED window makes sense and where it does not

Room with two FLAT-22X LED windows on the wall

The bathroom question keeps coming back under our videos. Someone has a windowless bathroom in a flat, saw our LED window in a video and wants the same thing above the bath. Our answer is a plain no. Our LED windows, panels and skylights are rated IP20, and a bathroom needs lights that can handle water. This article explains why, what to do with a windowless bathroom instead, and where a sky in the ceiling really works.

What IP20 means

The IP code tells you what a lamp's housing protects against. The first digit is about solid objects, the second about water. IP20 means you cannot poke a finger inside, and there is no protection against water at all. The second digit is zero.

Every lamp we sell is IP20, from ACCENT 30 x 30 cm to FOCUS Ø 120 cm. That is normal for fittings made for living rooms, offices and hallways. A bathroom needs something else.

Bathroom zones

Electrical installations in bathrooms follow the European document HD 60364-7-701. In the UK it is Section 701 of BS 7671, in Germany DIN VDE 0100-701, in Poland PN-HD 60364-7-701. All of them split the bathroom into zones:

zone 0IPX7zone 1IPX4 min.zone 2IPX4 min.outside the zones (steam still gets here)2.25 m60 cmbathour lamps: IP20
Zones under HD 60364-7-701. The 2.25 m height is measured from the floor; zone 2 reaches 60 cm from the edge of the bath or shower tray.
  • Zone 0 is the inside of the bath or shower tray. Only extra-low-voltage fittings rated IPX7.
  • Zone 1 is the space above the bath and shower up to 2.25 m. IPX4 at least, which means protection against splashing from any direction.
  • Zone 2 is a 60 cm strip around zone 1, also up to 2.25 m. IPX4 as well.

An IP20 lamp cannot go in any of these zones.

And the ceiling above 2.25 m?

Formally that is outside the zones. In a bathroom with a 2.6 m ceiling, a lamp in the middle of the ceiling could in theory hang there. We still do not recommend it.

The reason is simple: steam does not read standards. After a hot shower most of the moisture collects right under the ceiling, and in a windowless bathroom it clears more slowly because it depends on the extractor fan alone. A LED window has electronics, a driver and a diffuser inside, and the diffuser is meant to stay clean for years. Condensation inside is a risk we will not take on ourselves or pass on to a customer. That is why we answer bathroom questions before an order, not after.

A side note: if the mirror in your windowless bathroom stays fogged for fifteen minutes after every shower, check the extractor first. No lamp fixes that.

How to light a windowless bathroom

It can be lit well, just with different lamps. A few things make the biggest difference:

  1. Light at the mirror, at face height. Two vertical lights on either side of the mirror, or a backlit mirror. A single light overhead throws shadows under the eyes and nose, and in a bathroom without a window nothing fills them in.
  2. High CRI. Look for CRI 90 or higher. Below that, make-up and skin tone look different in the bathroom than outside it.
  3. Two colours for two times of day. Neutral 4000 K in the morning for shaving and make-up, warm and dimmed in the evening. Two circuits do it, or one lamp with adjustable colour.
  4. An IP rating that matches the zone. IPX4 or better above the shower, and IP44 on the ceiling outside the zones too, because of the steam.

You will find these lights in any good lighting shop. It is not our category and we do not pretend it is.

Where the sky works: the room next door

A windowless bathroom is rarely the only dark spot in a flat. It usually sits next to a hallway or a walk-in wardrobe with no windows either. That is where a sky in the ceiling works best, because it is the first and last place you see each day.

Room with two FLAT-22X LED windows on the wall
Two FLAT-22X wall windows. A window like this hangs on a hallway wall and needs no hole in the ceiling.

For a hallway in a flat we usually suggest:

  • FLAT 60 x 60 cm panel in a suspended ceiling. It is 36 mm thick, gives 2,500 lumens and costs €596 with a 3-year warranty.
  • FLAT-12L 64 x 64 cm window on an ordinary ceiling, surface-mounted with no chasing. 3,000 lumens, €1,161.
  • FLAT-22X 133 x 78 cm wall window when the ceiling is taken or too low. It looks like a window with a frame and a handle, €2,695.

Every FLAT lamp lets you set the colour of light from 2100 to 7500 K with the remote or the app.

↻ Turn the 3D model on the lamp page
FLAT 60 x 60 cm panel. Turn the model. The slider below it changes the colour of light.

Common questions

Can I put a LED window above the bath if the ceiling is high? We do not recommend it. Above the bath is zone 1 up to 2.25 m, and steam collects higher up anyway. IP20 gives no protection against water.

Do you make a waterproof version of the sky lamps? No. Every lamp we sell today is IP20 (as of 17 November 2026).

What about a large bathroom with a separate dressing area? Ask us before you order, with a photo and the dimensions. We will give you an honest answer, even if it is: not here.

See it in person

You can see our lamps in person in the showroom at Taneczna 27 in Warsaw, open around the clock. The remotes let you try every colour of light. If you want to work out how many lamps your hallway needs first, start with the lamp finder.

Reading next

A row of ZENITH LED skylights in a dark room with paintings
A person viewing rectangular ZENITH sky-effect fittings above a wall with artwork.