Home lighting

Sky-effect lighting for low ceilings: what are your options?

Two rectangular blue-sky panels in a white FLAT ceiling frame.

In a low room every centimetre counts, so people often choose a sky panel by thickness alone. Thickness is only part of the story: the frame, fixings and driver need room too. Here is what fits under a low ceiling, how much space each of our lamps needs, and what to measure before you order.

Measure two heights

The first is the room height from the finished floor to the finished ceiling. The second is the space above the ceiling, between the plasterboard and the slab. Check it in more than one spot, because a beam, a pipe or a ventilation duct can sit exactly where the lamp should go. A photo of the ceiling void and a simple section drawing save a lot of guessing.

What fits, and how much space it needs

Option Space above the ceiling Below the ceiling
FLAT panel in a 600 x 600 grid ceiling 50 mm Flush with the grid
FLAT panel recessed in a frame 100 mm Flush with the ceiling
FLAT panel hung on cables None The panel hangs below the ceiling, 36 mm thick
FLAT window (12L, 22L and others), surface-mounted None 70 mm
LINEA, recessed 100 mm Flush with the ceiling
ZENITH, recessed At least 240 mm Flush with the ceiling

With a concrete slab and no suspended ceiling at all, the surface-mounted FLAT windows and FLAT panels on cables are the two routes that need no building work. For the surface-mount variant of the FLAT 60 x 60 cm panel, ask us about availability first.

Think about where you will look from

In a low room the bright surface sits closer to your normal line of sight. Check the view from the sofa and from the doorway, not only from directly below. Dimming helps a lot here: our lamps dim smoothly and change colour temperature from the remote, so in the evening the panel can be soft and warm.

Plan access to the driver

Decide before installation how the driver will be reached later. In a grid ceiling you just lift the panel out. In a plasterboard ceiling leave an access hatch near the lamp. An opening big enough to put the panel in is not always big enough to work through later.

What about ZENITH and FOCUS?

Both are recessed and need more depth: ZENITH at least 240 mm. If the spot you want does not have it, there are three choices: another spot, a local drop in the ceiling just where the lamp goes, or a FLAT instead.

What to send us

The room plan, both heights, a photo of the ceiling and of the void above it if you can, where people sit, and whether you are renovating or want as little disruption as possible. We will tell you which configuration fits and what the quote includes: panel, frame, fixings and driver. You can also see the FLAT options in our showroom at Taneczna 27 in Warsaw, open 24/7.

Download the worksheet

Download the worksheet (PDF)

Reading next

A person viewing rectangular ZENITH sky-effect fittings above a wall with artwork.
Two rectangular blue-sky panels in a white FLAT ceiling frame.